Parts Of A Toy Microscope
A toy microscope is a less valuable version of the real microscope. Toy Microscope have the same parts as a basic microscope. The only difference is that they are made out of less expensive materials to make it more available to children and more affordable to parents. The toy microscope is a fully functional microscope, with downplayed magnification and parts. Here are the basic parts of a microscope that a kids microscope should have:
The Eyepiece Lens: this is where you look through to view the enlarged specimens. Usual magnification for Toy Microscope range from 10 to 100 times magnification.
The Tube: This joins the eyepiece lens to the objective lenses. The Objective Lenses: A basic microscope normally has between 2 to 4 objective lenses. They make it possible for the specimens to be magnified. Each lens has its own magnification capabilities, from 10 to 100 times.
The Condenser Lens: This type of lens focuses the light directly onto the specimen so that it can be viewed more clearly and in better detail. The Diaphragm or Iris: While the condenser lens focuses the light on the specimens, this part of the microscope has holes with different sizes where the light passes through. If the specimen is smaller, a smaller sized hole can be used to focus the light more effectively.
The Arm: This part props up the tube as it connects to the base. The Illuminator: This is what replaced the mirror that was used before. It is the source of light so that specimens can be viewed clearly.
The Stage: This acts as a podium with a flat surface where the slide holding the specimens is kept in place. The Turret: This is makes it possible for the objective lenses to be rotated so that the right lens and magnification are used to view the specimen.
The Rack Stop: This is the part that prevents the objectives from crushing the slide. It makes it possible for the objective lens to be adjusted without it crashing down on the slide.
The Base: This is the foundation of the microscope. It acts as a stand and it holds all the microscope pieces in an upright position.
The different parts of a basic microscope mentioned here is what you should look for in a toy microscope. All the parts might not be as high quality and efficient as a real microscope, but all should still function properly.
